Regional geoelectric structure beneath Deccan Volcanic Province of the Indian subcontinent using magnetotellurics

Understanding deep continental structure and the seismotectonics of Deccan trap covered region has attained greater importance in recent years. For imaging the deep crustal structure, magnetotelluric (MT) investigations have been carried out along three long profiles viz. Guhagarh–Sangole (GS), Sangole–Partur (SP), Edlabad–Khandwa (EK) and one short profile along Nanasi–Mokhad (NM). The results of GS, SP and NM profiles show that the traps lie directly over high resistive basement with thin inter-trappean sediments, where large thickness of sediments, of the order of 1.5–2.0 km, has been delineated along EK profile across Narmada–Son–Lineament zone. The basement is intersected by faults/fractures, which are clearly delineated as narrow steep conducting features at a few locations. The conducting features delineated along SP profile are also seen from the results of aeromagnetic anomalies. Towards the southern part of the profile, these features are spatially correlated with Kurduwadi rift proposed earlier from gravity studies. Apart from the Kurduwadi rift extending to deep crustal levels, the present study indicates additional conductive features in the basement. The variation in the resistivity along GS profile can be attributed to crustal block structure in Koyna region. Similar block structure is also seen along NM profile.Deccan trap thickness, based on various geophysical methods, varies gradually from 1.8 km towards west to 0.3 km towards the east. While this is the general trend, a sharp variation in the thickness of trap is observed near Koyna. The resistivity of the trap is more (150–200 Ω m) towards the west as compared to the east (50–60 Ω m) indicating more compact or denser nature for the basalt towards west. The upper crust is highly resistive (5000–10,000 Ω m), and the lower crust is moderately resistive (500–1000 Ω m). In the present study, seismotectonics of the region is discussed based on the regional geoelectrical structure with lateral variation in the resistivity of the basement and presence of anomalous conductors in the crust.     

Manual interpretation of (land sat-1) imagery for assessment of area under shifting cultivation in the district of Keonjhar,Orissa-India

In order to prepare schemes for Land reclamation, plantation and permanent settlement of the tribals of shifting cutivation areas in Orrisa a proper survey is a prerequisite. Earlier attempts vaguely idenified these areas. Wide disparity in data are found in the reports from different sources. Interpretation of LANDSAT-1 imagery can be used to study shifting cultivation areas in a scientific way. Lack of forests on sloping land is the chief characteristic of shifting cullivation areas. Landsat observation along with classified slope from topographic sheets provide most reliable and accurate data by minimising human error.     

Flood inundation modeling using MIKE FLOOD and remote sensing data

A coupled 1D-2D hydrodynamic model, MIKE FLOOD was used to simulate the flood inundation extent and flooding depth in the delta region of Mahanadi River basin in India. Initially, the 1D model MIKE 11 was calibrated using river water level and discharge data of various gauging sites for the monsoon period (June to October) of the year 2002. Subsequently, the calibrated set up was validated using both discharge and water level data for the same period of the year 2001. The performance of calibration and validation results of MIKE 11 were evaluated using different performance indices. A bathymetry of the study area with a spatial resolution of 90m was prepared from SRTM DEM and provided as an input to the 2D model, MIKE 21. MIKE 11 and MIKE 21 models were then coupled using lateral links to form the MIKE FLOOD model set up for simulating the two dimensional flood inundations in the study area. Flood inundation is simulated for the year 2001 and the maximum flood inundation extent simulated by the model was compared with the corresponding actual inundated area obtained from IRS-1D WiFS image.     

Resistivity Structure of the Central Indian Tectonic Zone (CITZ) from Multiple Magnetotelluric (MT) Profiles and Tectonic Implications

The Central Indian Tectonic Zone (CITZ) is a major tectonic feature extending across the Indian subcontinent. It was formed in the Paleoproterozoic when the Bastar Craton and the Bundelkhand Craton were sutured together. This region is recognized in the geological record as a persistent zone of weakness with many tectonothermal events occurring over geologic time. The weakness of this region may have caused the late Cretaceous/early Tertiary Deccan volcanism to have been localized in the CITZ. The zone is still tectonically active, as evidenced by sustained levels of seismic activity. This paper presents the first systematic investigation of the resistivity structure of the CITZ using multiple magnetotelluric (MT) transects. Two-dimensional (2D) resistivity models were generated for five north–south profiles that cross the CITZ and encompass an area of ~60,000 km². The models were based on the joint inversion of transverse electric (TE), transverse magnetic (TM) and tipper (Hz) data. All the profiles showed a low resistive (10–80 Ωm) middle to lower crust beneath the CITZ with a crustal conductance of 300–800 S. The presence of an interconnected fluid phase and/or hydrous/metallic minerals appears to be the most likely explanation for the elevated conductivity that is observed beneath the CITZ. The presence of fluids is significant because it may indicate the cause of persistent weakness at crustal depths. A northward dip of both the crustal conductive layer and coincident seismic reflections favor a northward polarity of the subduction process associated with the formation of the CITZ.     

Factor analysis of sphericity and roundness data of clastic quartz grains: Environmental significance

The first four sample statistics of two-dimensional projection sphericity and those of two-dimensional projection roundness of clastic quartz grains belonging to river, beach and eolian environments and to the three size grades 0.350 mm-0.297 mm, 0.297 mm-0.250 mm and 0.250 mm-0.210 mm were subjected to R-mode factor analysis. The results show that the particles of these size grades are carried largely as a traction carpet in the river and beach environments and are carried largely by saltation in the eolian environment. Sorting and abrasion are the causes of areal variation in the mean sphericity and mean roundness of a population, respectively. Selective sorting causes nonnormality in the sphericity distribution, whereas roundness distribution is originally nonnormal. Selective sorting is most effective in the eolian, less so in the beach and least so in the river environment, and consequently sphericity-nonnormality constitutes a valuable parameter for environmental discrimination. Intensity of rounding is highest in the beach, less in the eolian and least in the river environments. Due to its wide variation from environment to environment the mean roundness constitutes a valuable parameter for differentiating different environments. Sphericity variables contribute more to the discrimination of environments than roundness variables.     

Detection of a collision zone in south Indian shield region from magnetotelluric studies

Magnetotelluric (MT) investigations were carried out along a profile in the greenschist–granulite transition zone within the south Indian shield region (SISR). The profile runs over a length of 110 km from Kuppam in the north to Bommidi in the south. It covers the transition zone with 12 MT stations using a wide-band (1 kHz–1 ks) data acquisition system. The Mettur shear zone (MTSZ) forms the NE extension of Moyar–Bhavani shear zone that traverses along the transition zone. The regional geoelectric strike direction of N40°E identified from the present study is consistent with the strike direction of the MTSZ in the center of the profile. The 2-D conductivity model derived from the data display distinct high electrical resistivity character (10,000 Ω m) below the Archaean Dharwar craton and less resistive (< 3000 Ω m) under the southern granulite terrain located south of the MTSZ. The MTSZ separating the two regions is characterized by steep anomalous high conductive feature at lower crustal depths. The deep seismic sounding (DSS) study carried out along the profile shows dipping signatures on either side of the shear zone. The variation of deep electrical resistivity together with the dipping signature of reflectors indicate two distinct terrains, namely, the Archaean Dharwar Craton in the north and the Proterozoic granulite terrain towards south. They got accreted along the MTSZ, which could represent a possible collision boundary.     

Some Insights into the Lithospheric Electrical Structure in the Western Ghat Region from Magnetotelluric Studies

Magnetotelluric (MT) studies along a few traverses, some cutting across the Western Ghats, during the last few years have provided basic insights into the shallow as well as the deeper electrical structure in the regions near and east of the Western Ghat belt. The MT models broadly show a two layered lithospheric electrical structure with an upper high resistive layer (several thousands of Ωm) and a lower moderately conductive layer (a few tens to a few hundred Ωm). The depth of the interface between the two layers is found to vary from about 120–160 km in the south in the SGT to around 80 km in the north in the northern DVP. Another impressive feature that could be noticed in these electrical models is the presence of well-defined major near vertical crustal conductive feature associated with the region of Western Ghat belt, presumably associated with the tectonic evolution of the Western Ghats. Further, these models also brought out several other well-defined conductors that might be linked to structural features like faults, shear zones, etc., in the region. These conductors pierce through the crustal column and some of these, particularly those oriented in NW-SE direction, i.e., oriented transversely with respect to the ambient compressive stress direction of the Indian shield, assume significance in understanding the seismicity of the region.     

Magnetotelluric investigation of lithospheric electrical structure beneath the Dharwar Craton in south India:Evidence for mantle suture and plume-continental interaction

Broad-band and long period magnetotelluric measurements made at 63 locations along ～500 km long Chikmagalur-Kavali profile,that cut across the Dharwar craton(DC)and Eastern Ghat Mobile Belt(EGMB)in south India,is modelled to examine the lithosphere architecture of the cratonic domain and define tectonic boundaries.The 2-D resistivity model shows moderately conductive features that intersperse a highly resistive background of crystalline rocks and spatially connect to the exposed schist belts or granitic intrusions in the DC.These features are therefore interpreted as images of fossil pathways of the volcanic emplacements associated with the greenstone belt and granite suite formation exposed in the region.A near vertical conductive feature in the upper mantle under the Chitradurga Shear Zone represents the Archean suture between the western and eastern blocks of DC.Although thick(～200 km)cratonic(highly resistive)lithosphere is preserved,significant part of the cratonic lithosphere below the western DC is modified due to plume-continental lithosphere interactions during the Cretaceous—Tertiary period.A west-verging moderately conductive feature imaged beneath EGMB lithosphere is interpreted as the remnant of the Proterozoic collision process between the Indian land mass and East Antarctica.Thin(～120 km)lithosphere is seen below the EGMB,which form the exterior margin of the India shield subsequent to its separation from East Antarctica through rifting and opening of the Indian Ocean in the Cretaceous.